Here are the IS codes which will help you in civil engineering relating to sanitary and water fittings. These IS codes include Glazed stoneware pipe and fittings – Specification, Specification for glazed fire-clay sanitary appliances: Part 1 General requirements, Specification for glazed fire-clay sanitary appliances: Part 2 Specific requirements of kitchen and laboratory sinks, Specification for glazed fire clay sanitary appliances : Part 3 Specific requirements of urinals, Section 1 Slab urinals, Specification for glazed fire-clay sanitary appliances: Part 3 Specific requirements of urinals: Section 2 Stall urinals, Specification for glazed fire-clay sanitary appliances: Part 4 Specific requirements of postmortem slabs, Specification for glazed fire clay sanitary appliances: Part 5 Specific requirements of shower trays and more

Also Read

List Of IS Codes For Sanitary And Water Fittings

IS CodesDescription
IS 651:2007Glazed stoneware pipe and fittings – Specification
IS 771(Part 1):1979Specification for glazed fire-clay sanitary appliances: Part 1 General requirements
IS 771(Part 2):1985Specification for glazed fire-clay sanitary appliances: Part 2 Specific requirements of kitchen and laboratory sinks
IS 771(Part 3/Sec 1):1979Specification for glazed fire clay sanitary appliances : Part 3 Specific requirements of urinals, Section 1 Slab urinals
IS 771(Part 3/Sec 2):1985Specification for glazed fire-clay sanitary appliances: Part 3 Specific requirements of urinals: Section 2 Stall urinals
IS 771(Part 4):1979Specification for glazed fire-clay sanitary appliances: Part 4 Specific requirements of postmortem slabs
IS 771(Part 5):1979Specification for glazed fire clay sanitary appliances: Part 5 Specific requirements of shower trays
IS 771(Part 6):1979Specification for glazed fire-clay sanitary appliances: Part 6 Specific requirements of bedpan sinks
IS 771(Part 7):1981Specification for glazed fire-clay sanitary appliances: Part 7 Specific requirements of slop sinks
IS 772:1973Specification for general requirements for enamelled cast iron sanitary appliances
IS 774:2004Specification for flushing cistern for water closets and urinals (other than plastic cistern)
IS 778:1984Specification for copper alloy gate, globe and check valves for water works purposes
IS 779:1994Specification for water meters (domestic type)
IS 781:1984Specification for cast copper alloy screw down bib taps and stop valves for water services
IS 782:1978Specification for caulking lead
IS 1701:1960Specification for mixing valves for ablutionary and domestic purposes
IS 1703:2000Water fittings – copper alloy float valves (horizontal plunger type) – Specification
IS 1711:1984Specification for self-closing taps for water supply purposes
IS 1726:1991Specification for cast iron manhole covers and frames
IS 1795:1982Specification for pillar taps for water supply purposes
IS 2326:1987Specification for automatic flushing cisterns for urinals (other than plastic cisterns)
IS 2373:1981Specification for water meters (bulk type)
IS 2548(Part 1):1996Specification for plastic seats and covers for water-closets: Part 1 Thermoset seats and covers
IS 2548(Part 2):1996Specification for plastic seats and covers for water-closets: Part 2 Thermo plastic seats and covers
IS 2556(Part 1):1994Specification for vitreous sanitary appliances (vitreous china): Part 1 General requirements
IS 2556(Part 2):2004Specification for vitreous sanitary appliances (vitreous china): Part 2 Specific requirements of wash-down water-closets
IS 2556(Part 3):2004Specification for vitreous sanitary appliances (vitreous china): Part 3 Specific requirements of squatting pans
IS 2556(Part 4):2004Specification for vitreous sanitary appliances (vitreous china): Part 4 Specific requirements of wash basins
IS 2556(Part 5):1994Specification for vitreous sanitary appliances (vitreous china): Part 5 Specific requirements of laboratory sinks
IS 2556(Part 6):1995Specification for vitreous sanitary appliances (vitreous china): Part 6 Specific requirements of urinals and partition plates
IS 2556(Part 7):1995Specification for vitreous sanitary appliances (vitreous china): Part 7 Specific requirements of accessories for sanitary appliances
IS 2556(Part 8):2004Specification for vitreous sanitary appliances (vitreous china): Part 8 Specific requirements of padestal close coupled wash-down and siphonic water closets
IS 2556(Part 9):2004Specification for vitreous sanitary appliances (vitreous china): Part 9 Specific requirements of pedestal type bidets
IS 2556(Part 14):1995Specification for vitreous sanitary appliances (vitreous china): Part 14 Specific requirements of integrated squatting pans
IS 2556(Part 15):2004Specification for vitreous sanitary appliances (vitreous china): Part 15 Specific requirements of universal waterclosets
IS 2556(Part 16):2002 Specification for vitreous sanitary appliances (vitreous china): Part 16 Specific requirements for wash down wall mounted water closets
IS 2556(Part 17):2001Specification for vitreous sanitary appliances (vitreous china): Part 17 Specific requirements for wall mounted bidets
IS 2685:1971Code of practice for selection, installation and maintenance of sluice valves
IS 2692:1989Specification for ferrules for water services
IS 2963:1979Specification for copper alloy waste-fittings for wash basins and sinks
IS 3004:1979Specification for plug cocks for water supply purposes
IS 3006:1979Specification for chemically resistant glazed stoneware pipes and fittings
IS 3042:1965Specification for single faced sluice gates (200 to 1200 mm size)
IS 3311:1979Specification for waste plug and its accessories for sinks and wash-basins
IS 3950:1979Specification for surface boxes for sluice valves
IS 4038:1986Specification for foot valves for water works purposes
IS 4346:1982Specification for washers for use with fittings for water services
IS 5219(Part 1):1969Specification for cast copper alloys traps: Part 1 ‘P’ and ‘S’ traps
IS 5312(Part 1):2004Specification for swing check type reflux (non- return) valves: Part 1 Single door pattern
IS 5312(Part 2):1986Specification for swing check type reflux (non-return) valves for water works purposes: Part 2 Multi-door pattern
IS 5455:1969Specification for cast-iron steps for manholes
IS 5961:1970Specification for cast iron gratings for drainage purposes
IS 6411:1985Specification for gel-coated glass fibre reinforced polyester resin bath tubs
IS 6784:1996Method for performance testing of water meters (domestic type)
IS 7231:1994Specification for plastic flushing cisterns for waterclosets and urinals
IS 8931:1993Specification for copper alloy fancy single taps,combination tap assembly and stop valves for water services
IS 9140:1996Method of sampling of vitreous and fire clay sanitary appliances
IS 9338:1984Specification for cast iron screw-down stop valves and stop and check valves for water works purposes
IS 9739:1981Specification for pressure reducing valves for domestic water supply systems
IS 9758:1981Specification for flush valves and fittings for water closets and urinals
IS 9762:1994Specification for polyethylene floats (spherical) for float valves
IS 9763:2000Plastic bib taps, pillar taps, angle valves and stop valves for hot and cold water services – Specification
IS 11246:1992Specification for glass fibre reinforced polyester resins (GRP) squatting pans
IS 12234:1988Specification for plastic equilibrium float valve for cold water services
IS 12701:1996Specification for rotational moulded polyethylene water storage tanks
IS 13049:1991Specification for diaphragm type (plastic body) float operated valves for cold water services
IS 13114:1991Specification for forged brass gate, globe and check valves for water works purposes
IS 13349:1992Specification for single faced cast iron thimble mounted sluice gates
IS 13983:1994Specification for stainless steel sinks for domestic purposes
IS 14399(Part 1):1996Hot press moulded thermosetting glass fibre reinforced polyester resin (GRP) sectional water storage tanks: Part 1 Specification for panels
IS 14399(Part 2):1996Hot press moulded thermosetting glass fibre reinforced (GRP) sectional water storage tanks:Part 2 Guidelines for assembly and installation
IS 14845:2000Resilient seated cast iron air relief valves for water works purposes – Specification
IS 14846:2000Sluice valves for water works purposes (50-1200 mm) – Specification

LEAVE A REPLY

Please enter your comment!
Please enter your name here